Solid Carbide Pilot Drill
Diameter range: _3～_20mm;
Drilling accuracy: IT8~IT9;
Special groove type, excellent chip removal;
Strong centering abiluty improves drilling stability;
4 supporting flutes,ensure good guiding and machining effect.
Solid Carbide Pilot Drill suitable for the drilling process on CNC machine,machining center.DTG-W range suit pure titanium and titanium alloy.DTJ-A range suit pure titanium and titanium alloy. Finish of holes to be drilled reach IT8-IT9.
Special groove type, excellent chip removal;
Strong centering abiluty improves drilling stability;
4 supporting flutes,ensure good guiding and machining effect.
|
Model |
D05-PAE-CA |
|
Diameter range |
_3～_20mm |
|
Drilling accuracy |
IT8~IT9 |
|
Limit |
GH6-GH9 |
|
Brand |
CHTOOLS |
|
Applicable material |
Mlid Steel, Structursl Steel, Allor Steel, Stainless Steel, Copper Alloys, etc. |
|
Applicable machine |
Applicable machine |
the Advantages of Solid Carbide Pilot Drill
1. Products including solid carbide drills, step drills, flat-bottom drills and straight-groove drills.
2. Ultra-fine grain carbide materials.
3. High performance PVD coating.
4. High chip-tolerance flute type, which combines efficient chip removal and rigidity .
5. Sharp polished edges for reliable chip breaking and stable cutting resistance.
6. Specification according to DIN6537.ardened steel and
Applicable industry
1. Power generation industry (turbine, boiler, etc.)
2. Mould industry: coolant hole
3. Auto industry: shaft, piston pin, cylinder block, etc.
4. Aerospace industry: landing gear, gas turbine shaft
5. Steelmaking industry: billet
6. Injection molding machine, chemical engineering and other industries
Solid Carbide Pilot Drill's FAQ
Q: 1. What is a solid carbide drill?
+
-
A: solid carbide, also carbide Called, is a material consisting primarily of tungsten carbide and a binder, usually cobalt , consists. It is a very hard and wear-resistant material that is often used for tools that work in extreme conditions.
Q: 2. When to use carbide drill bits?
+
-
A: Carbide drill bits are the strongest for metal and can cut work-hardened ferrous metal, including stainless steel.
Q: 3. Do carbide drill bits break easily?
+
-
A: Hardness refers to the surface of the material – essentially, how easy it is to scratch or dull its surface – while brittleness refers to how easy it is to break. So while carbide drill bits are very hard, and can cut through some of the most difficult materials, they're also brittle and can break if not used properly.
Q: 4.Can you use carbide bit on wood?
+
-
A: Tungsten carbide bits are a type of cutting tool used in a variety of industries for drilling, cutting, and shaping hard materials such as metal, wood, and plastics
Q: 5. What are solid carbide drill bits used for?
+
-
A: Masonry and Construction: In construction, carbide drill bits are indispensable for drilling through tough masonry materials such as concrete, stone, and brick. They are also commonly used for installing anchors and fasteners in these materials.
Hot Tags: solid carbide pilot drill, China solid carbide pilot drill manufacturers, suppliers, factory, 12mm Carbide Drill Bit, Carbide Drill, Solid Carbide Internal Cooling Drill
Previous
No InformationYou Might Also Like
Send Inquiry